J Boats J/99 Turnkey Offshore Racer
Price AU $330,000 Huge price reduction
		Price
	
	
		AU $330,000 Huge price reduction	
		Details
	
	
		Simply the Best J99 on the market. 
Extensively upgraded and meticulously maintained, Rum Rebellion is an absolutely turnkey yacht, ready for anything from Saturday afternoon racing to a Sydney Hobart campaign- She has already qualified for the 2025 Hobart. Often on the podium in the two handed division, Rum Rebellion is for sale for a fraction of her replacement cost- in fact, for less than the cost of a brand new J99, you get everything you could need to get on the podium- from her carbon floorboards to her new sail wardrobe, her passionate owner has left nothing to chance in the preparation of this yacht, and inspections are encouraged. Even the kettle is titanium in the pursuit of weight gains!
Get comfortable- the list of upgrades is phenomenal.
Rum Rebellion is in full Cat 1 safety compliance and all safety equipment including flares and first aid supplies have been updated in 2025. She is weighed and optimised with a current IRC Certificate as at July 2025 (IRC 1.006), and with a very competitive fleet of J99s currently racing ( 6 in the last Sydney Gold Coast Race), you immediately have one design offshore racing available.
Her rig has been inspected each year, most recently in June 2025 prior to the Sydney to Gold Coast Race (Rig report available).
Delivered in October 2021, she immediately had her hull faired and epoxy coated. She has been refaired, sprayed and polished each year since, most recently in September 2025. At each haul out her engine is serviced and her keelbolts retorqued.
In 2024 her Keel Fin Bulb Laminate was also stripped, re-laminated and re-faired. In 2024 her rudder bearings were replaced. Each year all flush seacocks are cleaned and lubricated. In August 2024 a new a gori racing prop was fitted, and the sail drive serviced.
A great deal of effort has been undertaken to ensure she is as light, strong and as durable as possible. Bulkheads have been reinforced, vulnerable flush fitting sea cocks protected and everything correctly secured. To optimise for IRC and maximise weight loss, her floorboards, nav desk lid and table have been rebuilt in bespoke carbon and the washboards and head door replaced with composite foam sandwich. In 2024 a custom sliding carbon dodger was built to further enhance weather protection for the crew. Winches can be operated with this in the closed position and it slides open to allow letterbox spinnaker drops. And, of course, she has a carbon fibre toilet!
All safety equipment is professionally labelled and placed to ensure optimal weight distribution. Water is plumbed with two 50 Ltr collapsable water tanks symmetrically placed to ensure Cat 1 compliance and better weight distribution. An additional manual bilge pump was also installed. Additional fuel to meet Sydney to Hobart compliance is uniquely stored in bulkhead mounted port and starboard 7.5 litre jerry cans.
Enormous thought and investment has gone into Rum Rebellions rig to ensure optimumstrength and usability. Her carbon fibre bowsprit and tiller have been reinforced and re-sprayed with two pack. Her Bobstay has been redesigned with premium cordage and fittings to ensure adequate support for the furling
Code Zero and a custom stainless fitting was engineered to run the two tack line system.
At launch, an additional fractional halyard with sheave box and monocle were installed along with a spinnaker pole traveller with butt up/but down control at the mast.
Jason Neuhouse from Diverse rigging has overseen her rigging program, highlights of which include-
Rod forestay to ensure a more stable rig and a Cyclops load cell fitted.
All Halyards have been replaced with high quality cordage, and in 2025 her vang and boom were removed, vang serviced with a new vang end fitting installed. A new vang base and gooseneck swivel captive bolt system engineered by Whale Spar rigging and installed. Her outhaul, jib outhaul and jib car stops were also replaced this year, as was reefing line 2 with dyneema.
All stern bilge pump outlets have had non return valves fitted. A custom drainage system was constructed to ensure water entering the engine venting system in a following sea was directed overboard (port and starboard). In addition one way valves have been fitted to the bilge weep holes between bulkheads to ensure bilge water does not flow between bulkheads from the bilge when the boat is heeled.
In 2024 all winches were replaced with Ronstan Quick Tail sheet winches- these are fantastic for short handed sailing. All winches are serviced regularly by Knights Engineering.
Logbooks and receipts for all work available.
Located at the Cruising Yacht Club of Australia- Please Contact Campbell Geeves at Flagstaff Marine to arrange an inspection or for fiurther information.
Extensively upgraded and meticulously maintained, Rum Rebellion is an absolutely turnkey yacht, ready for anything from Saturday afternoon racing to a Sydney Hobart campaign- She has already qualified for the 2025 Hobart. Often on the podium in the two handed division, Rum Rebellion is for sale for a fraction of her replacement cost- in fact, for less than the cost of a brand new J99, you get everything you could need to get on the podium- from her carbon floorboards to her new sail wardrobe, her passionate owner has left nothing to chance in the preparation of this yacht, and inspections are encouraged. Even the kettle is titanium in the pursuit of weight gains!
Get comfortable- the list of upgrades is phenomenal.
Rum Rebellion is in full Cat 1 safety compliance and all safety equipment including flares and first aid supplies have been updated in 2025. She is weighed and optimised with a current IRC Certificate as at July 2025 (IRC 1.006), and with a very competitive fleet of J99s currently racing ( 6 in the last Sydney Gold Coast Race), you immediately have one design offshore racing available.
Her rig has been inspected each year, most recently in June 2025 prior to the Sydney to Gold Coast Race (Rig report available).
Delivered in October 2021, she immediately had her hull faired and epoxy coated. She has been refaired, sprayed and polished each year since, most recently in September 2025. At each haul out her engine is serviced and her keelbolts retorqued.
In 2024 her Keel Fin Bulb Laminate was also stripped, re-laminated and re-faired. In 2024 her rudder bearings were replaced. Each year all flush seacocks are cleaned and lubricated. In August 2024 a new a gori racing prop was fitted, and the sail drive serviced.
A great deal of effort has been undertaken to ensure she is as light, strong and as durable as possible. Bulkheads have been reinforced, vulnerable flush fitting sea cocks protected and everything correctly secured. To optimise for IRC and maximise weight loss, her floorboards, nav desk lid and table have been rebuilt in bespoke carbon and the washboards and head door replaced with composite foam sandwich. In 2024 a custom sliding carbon dodger was built to further enhance weather protection for the crew. Winches can be operated with this in the closed position and it slides open to allow letterbox spinnaker drops. And, of course, she has a carbon fibre toilet!
All safety equipment is professionally labelled and placed to ensure optimal weight distribution. Water is plumbed with two 50 Ltr collapsable water tanks symmetrically placed to ensure Cat 1 compliance and better weight distribution. An additional manual bilge pump was also installed. Additional fuel to meet Sydney to Hobart compliance is uniquely stored in bulkhead mounted port and starboard 7.5 litre jerry cans.
Enormous thought and investment has gone into Rum Rebellions rig to ensure optimumstrength and usability. Her carbon fibre bowsprit and tiller have been reinforced and re-sprayed with two pack. Her Bobstay has been redesigned with premium cordage and fittings to ensure adequate support for the furling
Code Zero and a custom stainless fitting was engineered to run the two tack line system.
At launch, an additional fractional halyard with sheave box and monocle were installed along with a spinnaker pole traveller with butt up/but down control at the mast.
Jason Neuhouse from Diverse rigging has overseen her rigging program, highlights of which include-
Rod forestay to ensure a more stable rig and a Cyclops load cell fitted.
All Halyards have been replaced with high quality cordage, and in 2025 her vang and boom were removed, vang serviced with a new vang end fitting installed. A new vang base and gooseneck swivel captive bolt system engineered by Whale Spar rigging and installed. Her outhaul, jib outhaul and jib car stops were also replaced this year, as was reefing line 2 with dyneema.
All stern bilge pump outlets have had non return valves fitted. A custom drainage system was constructed to ensure water entering the engine venting system in a following sea was directed overboard (port and starboard). In addition one way valves have been fitted to the bilge weep holes between bulkheads to ensure bilge water does not flow between bulkheads from the bilge when the boat is heeled.
In 2024 all winches were replaced with Ronstan Quick Tail sheet winches- these are fantastic for short handed sailing. All winches are serviced regularly by Knights Engineering.
Logbooks and receipts for all work available.
Located at the Cruising Yacht Club of Australia- Please Contact Campbell Geeves at Flagstaff Marine to arrange an inspection or for fiurther information.
		Region
	
	
		New South Wales	
		Location
	
	
		Sydney NSW	
		Usage
	
	
		Family, Cruising, Racing	
		Reference
	
	
		RUM J99	
		Year
	
	
		2021	
		Designer
	
	
		Alan Johnstone	
		Builder
	
	
		J Boats France	
		Length
	
	
		32' 7" - 9.94m	
		Beam
	
	
		3.4m	
		Draft
	
	
		2m	
		Displacement
	
	
		3.8	
		Keel / Ballast
	
	
		Cast Iron Fin, lead bulb	
		Hull Material
	
	
		Fibreglass/GRP	
		Deck Material
	
	
		Infused composite	
		Engine
	
	
		D-120	
		Engine Make
	
	
		Volvo Penta	
		Propulsion
	
	
		Sail drive, Gori folding prop	
		Fuel
	
	
		50 litre tank plus 2 x10 litre cans	
		Water
	
	
		100 litres, flexible tanks	
		Refrigeration
	
	
		Yes	
		Stove
	
	
		2 burner eno gas stove	
		Toilet
	
	
		Carbon	
		Covers
	
	
		Yes	
		Safety Gear
	
	
		Full up to date cat 1	
		Bilge Pumps
	
	
		Electric, automatic and manual bilge pumps. Extra manual installed.	
		Life Raft
	
	
		4 man, in date. Jon Bouy in hard case	
		Epirb
	
	
		Yes	
		Flares
	
	
		Yes	
		Fire Protection
	
	
		2 x Extinguishers, Fire Blanket	
		Electronics
	
	
		Full B & G System Installed
B & G H5000 Hercules base pack
3 X B & G 20/20 Displays
3 Way Mast Bracket
B & G Zeus 3 9" MFD
C Map
Go Free Wifi
Ethernet ExpansionVHF/AIS pack
B & G Speed Sensor Pack
NSPL Antenna Splitter
VHF Masthead Antenna and Cable
B & G Depth/Temp Sensor Pack
Flush Thru Hull Fitting
B & G H5000 Pilot CPU
2 X H5000 Pilot Controller
RF 25N Rudder Sensor
B & G Precision 9 Compass
WS 710 810mm VHMU
KISS-SSB Ground Plate
HF Radio available
Masthead Tri Light
B & G NAIS 5000
Icom IC M423GB VHF Radio
Icom HM-195GB Command Mike
Moonraker 12SR Deck Mount
Blue Seas System Fuse Block
Moonraker HF Antenna Cable
Iridium Go plus external antenna
Iridium Go Executive plus external antenna
B & G H5000 Hercules base pack
3 X B & G 20/20 Displays
3 Way Mast Bracket
B & G Zeus 3 9" MFD
C Map
Go Free Wifi
Ethernet ExpansionVHF/AIS pack
B & G Speed Sensor Pack
NSPL Antenna Splitter
VHF Masthead Antenna and Cable
B & G Depth/Temp Sensor Pack
Flush Thru Hull Fitting
B & G H5000 Pilot CPU
2 X H5000 Pilot Controller
RF 25N Rudder Sensor
B & G Precision 9 Compass
WS 710 810mm VHMU
KISS-SSB Ground Plate
HF Radio available
Masthead Tri Light
B & G NAIS 5000
Icom IC M423GB VHF Radio
Icom HM-195GB Command Mike
Moonraker 12SR Deck Mount
Blue Seas System Fuse Block
Moonraker HF Antenna Cable
Iridium Go plus external antenna
Iridium Go Executive plus external antenna
		Sail Inventory
	
	
		All sails are from Hood Sails
October 2021
35 m2 Reef Black membrane main 5 batten
27 m2 J2 Drifter Tri Radial Cut Technora 4 batten
27 m2 J2 Black membrane 4 batten
20 m2 J4 Black membrane 4 batten
6.5 m2 Cross Cut Storm Jib
27 m2 Furling Jib Top
68.5 m2 Furling Masthead Code Zero
108 m2 A2
86 m2 Fractional A6
Karver KF 1.5 Furler and top down adaptor for Code 0 and Jib Top
July 2023
108 m2 A2
December 2024
New Three Reef Membrane Mainsail
New membrane J2
October 2021
35 m2 Reef Black membrane main 5 batten
27 m2 J2 Drifter Tri Radial Cut Technora 4 batten
27 m2 J2 Black membrane 4 batten
20 m2 J4 Black membrane 4 batten
6.5 m2 Cross Cut Storm Jib
27 m2 Furling Jib Top
68.5 m2 Furling Masthead Code Zero
108 m2 A2
86 m2 Fractional A6
Karver KF 1.5 Furler and top down adaptor for Code 0 and Jib Top
July 2023
108 m2 A2
December 2024
New Three Reef Membrane Mainsail
New membrane J2
Seller Details
 
		 
		
		
		
		 
		
			 
	 
	 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						 
						